phytron
39
MA 1275-A004 EN
6 Commissioning
Please read the manual for basic commissioning information of the INAM01 module:
Further manual
Detailed information on this subject is in a supporting manual:
“
phyMOTION
TM
Modular Multi-axis Controller for Stepper Motors”
The programming environment
phyLOGIC
TM
ToolBox is explained in the following manual:
Further manual
Detailed information on this subject is in a supporting manual:
“
phyLOGIC
TM
ToolBox – Communication Software for the
phyMOTION
TM
Stepper Motor Controller“
For programming the sequential program please read:
Further manual
Detailed information on this subject is in a supporting manual:
“
phyLOGIC
TM
Command Reference
for the
phyMOTION
TM
Controller”
Information about positioning you’ll find in:
Further manual
Detailed information on this subject is in a supporting manual:
“Principles of Positioning of the Stepper Motor Controllers“
i
CAUTION – Possible damage!
Some modules are set to a default value on delivery. So e.g., the motor current
must be set to the corresponding value (see the motor data from the motor
manufacturer). Connected components like motors can be damaged by incorrectly
set values.
- Please check if the parameters are correct before starting.
Summary of Contents for phyMOTION INAM01.1
