Manual MSD2
+
MA 2126
–A005 EN
10
ServiceBus
The ServiceBus is connected by the 6-pole connector
“ServiceBus” on the front panel and
offers the following possibilities:
configuration by software via 4-wire RS 485 bus
power stage parameter programming:
run and boost current, step resolution, preferential motor direction, etc.
parameter memory to hold data safely in the power stage EPROM
detailed error analysis
temperature monitoring
The power stage can easily and quickly be programmed by ServiceBus-Comm
TM
for
Windows
software (see manual ServiceBus-Comm
TM
).
i
The instruction set for parameterising the power stage is listed
in chapter 10.
The rotary switch
“Addr.” is used to set the device address.
3.1 Accessories
The MSD2
+
and ServiceBus-Comm
TM
manual or the ServiceBus-Comm
TM
software can be
downloaded from the Phytron website www.phytron.de.
The mating connectors are included in the scope of delivery (see chapter 8.2)
.
Optional accessories are available:
- USB-RS485 converter as stick (#10012295)
- ServiceBus cable on request
- Ready-made cable on request
