Manual MSD2
+
MA 2126
–A005 EN
36
When MSD2
+
power stage is controlled by a
phyMOTION
TM
controller, read the manual for
basic commissioning information before putting-into-service:
Further Manual
This manual is in addition to the following main manual:
“phyMOTION
TM
Modular Multi-
axis Controller for Stepper Motors”
- First, read the main manual and then continue with this manual.
The MSD2
+
power stage settings with the ServiceBus-Comm
TM
communication software
are explained in the following manual:
Further Manual
This manual is in addition to the following main manual:
“ServiceBus-Comm
TM
Communication Software for Stepper Motor Power
Stages with ServiceBus
”
- First, read the main manual and then continue with this manual.
i
CAUTION
– Possible damage!
The power stage is delivered with the factory settings. So e.g., the motor
current must be set to the corresponding value (see the motor data from
the motor manufacturer). Connected components like motors can be
damaged by incorrectly set values.
- Please check if the parameters are correct before starting.
