Title
Service Manual, LPCR2
Page
43 of
104
Doc
Type
Service Product Drawing
Doc
ID
3323299
Doc
Rev
B
Doc
State
Released
State Date
11/14/2017
7000545 Revision A
Note
:
A multiple Wi-Fi networks can be stored in CR2 by repeating above procedure. The CR2 will be automatically
detect and connect to whichever Wi-Fi network is in the range.
Confirm Connection to LIFELINK or LIFENET
Overview
: After the Wi-Fi settings have been stored in the
CR2
, perform this procedure at the intended
CR2
location
to make the
CR2
check in to LIFELINK or LIFENET. If the intended location only has cellular signal and the
CR2
has
cellular capability, this procedure will perform the
CR2
Check-In to LIFELINK or LIFENET via cellular network. Device
data from the
CR2
will be transferred to LIFELINK or LIFENET during this procedure.
Prerequisites
:
•
The
CR2
must be in its intended location, with access to the Wi-Fi or cellular network.
•
Wi-Fi settings must have been stored in the
CR2
,
or
•
CR2
must have cellular capability.
Required Time
:
•
Less than 5 minutes if Wi-Fi signal strength is optimal, or cellular network signal is available at the location.
Steps
:
1. Take the
CR2
to its intended location.
