![background image](http://html1.mh-extra.com/html/phonic/xp6000/xp6000_user-manual_1552675009.webp)
5
XP6000
English
XP6000
Stereo Mode (both channels driven)
8 ohms FTC 20Hz-20kHz 0.1% THD
1420W
4 ohms FTC 20Hz-20kHz 0.1% THD
2180W
2 ohms FTC 20Hz-20kHz 0.1% THD
2600W
8 ohms EIA 1kHz 0.1% THD
1500W
4 ohms EIA 1kHz 0.1% THD
2400W
2 ohms EIA 1kHz 1% THD
3000W
Bridge Mono Mode
8 ohms FTC 20Hz-20kHz 0.1% THD
4000W
8 ohms EIA 1kHz 0.1% THD
4800W
4 ohms EIA 1kHz 1% THD
6000W
All Models
Distortion (SMPTE-IM)
<0.02%
Distortion (Typical) 20Hz-20kHz: 10dB
below rated power
<0.02%
Distortion (Typical) 1kHz and below: full
rated power
<0.02%
Frequency Response
20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB
5Hz to 50kHz, 8 ohms, LF filter bypassed, +0/-3 dB
Damping Factor
>250 @ 8 ohms
Noise (unweighted)
100 dB below rated output (20 Hz to 20kHz, 8 ohms load)
Input sensitivity
1.42 Vrms for 1000 watts into 8 ohms
Controls (Front)
AC power switch, Ch1 & Ch2 gain control with 41 detents
Control (Rear)
12-pole DIP switch featuring high pass filter on/off, high pass filter 30/50Hz, Clip Limiter
on/off control for each channel and switches for selecting Stereo, Parallel, or Bridge
Mode. Push-button circuit breaker for each channel. Switch for Grounding / Floating.
Voltage Gain
41x (36dB)
Input Impedance
20k ohms balanced, 10k ohms unbalanced
Indicators
Power-On, Bridge, Parallel, CLIP/LIM, Protect,
and LEDs for -10dB, -20dB and -40dB signal LEDs
Connectors Input
XLR, 1/4” TRS jacks and barrier strip
Connectors Output
Binding posts and speakon outputs (CH1 speakon wired for biamp)
Cooling
Continuous variable-speed fan, rear-to-front air flow
Amplifier Protection
Short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into mismatched loads
Load Protection
ON/OFF muting, DC fault output crowbar
Output Circuitry
Class H Amplifier
Power Requirements (depends on region)
100-120VAC, 220-240VAC (+/- 10%), 50/60Hz (factory configured);
120V model requires 20 amp
Circuit Breakers
Two (one for each channel): 100 and 120V models: 20 amp / 230 V models: 10 amp
Dimensions (WxHxD)
482.6 x 133.5 x 376mm (19" x 5.2" x 14.8")
Weight
28.2 kg (62.2 lbs)
SPECIFICATION
Summary of Contents for XP6000
Page 1: ...User s Manual Manual del Usuario XP6000...
Page 12: ...8 XP6000 Espa ol...
Page 19: ...Appendix Ap ndice 1 XP6000 DIMENSIONS DIMENSIONES...
Page 20: ......