Phonetics Sensaphone IMS-4000, User Manual

Page: 39 / 166

Chapter 2: IMS-4000 Software
Introduction
This chapter is designed to help you program and use the IMS-4000 to its fullest potential. The
IMS-4000 system helps you maintain, monitor, expedite and control the things that affect your
information infrastructure.
Help
The IMS-4000 ConsoleView Software provides an extensive Help system to supplement the docu-
mentation. Use IMS-4000 Help to access information about commands and dialog boxes. Online
help is also available simply by selecting Help from the main menu.
IMS-4000 Quick Start Guide
This section presents a useful shorthand guide to configuring your IMS-4000 System for the first
time. More detailed information on the processes covered can be found in the sections that follow.
Install Units and Configure Network Settings
Install the IMS-4000 Host and Node(s). Configure the Network settings through the serial port on
the front of the units. A terminal or terminal-emulation program can be used. Set the terminal set-
tings for 9600bps (8, N, 1). The default password is “ims4k.”
Install Software and Log In to Host
Install the IMS-4000 software from your CD-ROM or other media. Double-click on the IMS-4000
icon on your desktop. The IMS-4000 ConsoleView screen will appear. From the main menu select
Enterprise , then Add Enterprise Group . See below:
Figure 1: Add Group
Right-click on the words
IP Unknown
below the enterprise name and select
Set IP Address
. Enter
the IP address for your IMS-4000 Host and click OK . The software will prompt you for a username
and password to log in.
Default Username and Password
For new units, the default username is admin and the default password is ims4k . The software will
now attempt to connect to your IMS-4000 Host. A progress bar will show the software retrieving
information from the Host.
Note : Do not save the default username and password, because it will be deleted automatically
once a Master System Administrator profile is configured.
Chapter 2: Software
39