Phonetics Sensaphone 4100, User Manual

Page: 56 / 68

Sensaphone Model 4100 Instruction Manual
54
Communications / Dialout Problems:
Problem Possible Cause Solution
Unit won’t dial out. Phone number incorrectly See Chapter 3.
programmed.
Incorrect tone/pulse selection. See Chapter 3.
Incompatible phone line. The Model 4100 must be hooked up to
a standard 2-wire analog phone line,
NOT a digital extension to a phone
system. If the unit won’t dial out and it
is not the two previous problems, try
hooking the unit up to a phone line that
you know is standard (such as a
residential or home phone). If it works,
then there is an incompatibility with the
other phone system. If this does not
work, call Sensaphone Technical Service
Department.
Unit won’t answer Incorrect programming of rings When used on a proper extension line,
phone. until answer. some phone systems won’t let the
phone ring past 4 rings. If rings until
answer is greater than 4, you cannot get
to the unit. Try setting the rings to less
than 4 (see Chapter 3). If it still does not
work, then the phone line may be
incompatible (see below).
Incompatible phone line. The Model 4100 must be hooked up to
a standard 2-wired analog phone line,
NOT a digital extension to a phone
system. If you cannot call into the unit,
try hooking it up to a phone line that
you know is standard (such as a
residential or home phone). If you
can call in, then there is an
incompatibility with the other phone
system. If you still cannot call in, call
Sensaphone Technical Service
Department.