Phonetics Sensaphone 4100, User Manual

Page: 28 / 68

To delete the ID number:
1. Press the SET key
2. Press the ID# key
3. Press ENTER
The 4100 will say “Enter.” When interrogating the ID number, the 4100 will
say “no number.”
LOCAL VOICE MUTE
When the Model 4100 dials out with an alarm, it recites the alarm message over the phone
and at the monitor site. The local voice mute command is programmed within the ID
number. It allows you to mute the voice at the monitor site during alarm dialouts and status
call-ins.
To locally mute the Model 4100:
1. Press the SET key
2. Press the ID# key
3. Press the MUTE key
The 4100 will beep.
3. Using the number keys, enter up to 32 digits for the ID number
The 4100 will recite the digits as they are pressed.
4. Press ENTER. The 4100 will say “Enter.”
When you interrogate the ID number, the 4100 will say “Hello, this is telephone number,”
and then beep to indicate that the mute is programmed. It will then continue with the rest of
the status report.
TIME
The Model 4100 has a built-in clock. The power-up time is 12 AM. The clock will keep
time from 12 AM until you program the current time. It will then keep time from your
programmed time. If the AC power fails, the clock will continue to keep time until the
battery backup fails. It will then reset to 12 AM when power is restored. An incorrect time
is a good indication that the power has failed and the battery has been expended.
To program the time:
1. Press the SET key
2. Press the TIME key
(enter number)
Sensaphone Model 4100 Instruction Manual
26