Phoenix Contact TP 6000 HMI, User Manual

Page: 19 / 30

Maintenance
4109_en_B PHOENIX CONTACT
17/28
5 Maintenance
5.1 Fuse
NOTE:
The semiconductor fuse cannot be replaced.
A semiconductor fuse protects the device. Once the fuse has been tripped, the device must
be disconnected from the supply voltage to allow the semiconductor fuse to regenerate. At
an ambient temperature of 20°C (68°F), the regeneration takes approximately 20 seconds.
The higher the ambient temperature, the longer the regeneration takes.
5.2 Battery replacement
The battery can be replaced if it fails.
1. Disconnect power from the TP 6…PS.
2. Remove the unit from it’s mounting, either VESA or panel mount, and place it on a flat
surface.
Place the TP 6…PS on a towel to protect the display from damage.
Figure 5 - 1 Battery replacement
1
2
3