Phoenix Contact TP 6000 HMI, User Manual

Page: 20 / 30

TP 6…PS
18/28
PHOENIX CONTACT 4109_en_B
3. Remove the screws securing the back cover (1) and remove the cover.
4. Locate the battery (2) and unplug the battery connector (3).
5. Remove the battery. It is held in place with double-stick tape and may require a small
amount of effort to remove.
6. Secure the new battery in place using new double-stick tape (obtained locally).
7. Plug the battery into the circuit board.
8. Place the back cover on the unit and secure with the previously removed hardware.
Torque screws to 0.5 Nm.
9. Remount the TP 6…PS and apply power.