For your safety
107753_en_00
PHOENIX CONTACT
4.4
Replacing the seal insert on the pen magazine
Figure 4-1
Remove the seal insert
•
Open the pen magazine by pressing on the “Penstation open / close” button.
•
Insert the accompanying key on the seal insert.
•
Carefully lever the seal insert out of the retaining tube.
Figure 4-2
Inserting and aligning the seal insert
•
Insert the new seal insert (CMS-P1-PENDEPOT, 5144835) into the pen magazine.
•
Carefully press the seal insert into the aluminum pipe until it hits the stop.
•
Now use the key to align seal insert in such a way that the key is parallel to the writing
surface. The lateral opening of the seal insert must be aligned in the center.
