PLOTMARK
PHOENIX CONTACT
107753_en_00
3.2.2
Inserting the marker pen into the pen holder on the writing
arm
Figure 3-2
Pen holder (left: CMS-PEN..., right: P-PEN with adapter)
•
Only for P-PEN, 0815211: insert the marking pen in the adapter in such a way
(P-PEN ADAPTER, 0815224) that the tip of the pen protrudes below.
•
Slide the marker pen with the adapter into the holder on the writing arm.
•
Remove the marker pen from the holder after the marking process. To prevent it from
drying out, close it with the supplied storage station.
If you use the marker pen directly in the pen holder on the writing arm, remove the check
box in CLIP PROJECT for “Use pen magazine”. This ensures that the marker pen is not
stored in the pen magazine.
You can find “Use pen magazine” under “File, Print setup, Plotter, PLOTMARK, Pen as-
