PLOTMARK
PHOENIX CONTACT
107753_en_00
2.4.3
Setting up the plotter in CLIP PROJECT
•
Open “File, Print setup”.
•
Via “Plotter, PLOTMARK”, create a new device or edit the ones that are already there.
Figure 2-2
Pen settings tab
Table 2-2
File, Print setup, Plotter, PLOTMARK
TAB
Description
Plotter parame-
ters
If the writing position moves, no change is required.
Interface
Select “USB” as the interface.
Pen assignment
Indicate where the marker pens are located in the pen magazine
(Penstation).
If you insert the marker pen directly into the pen holder on the writing
arm, remove the check box for “Use pen magazine”.
Pen settings
Indicate which font size is executed with which pen.
