background image

RAD-ISM-900-EN-BD…

B-8

PHOENIX CONTACT

2476_en_I

Fragmentation

Breaking a packet into smaller units when transmitting over a network medium that cannot 

support the original size of the packet.

FTP (File Transfer 

Protocol)

A protocol used to transfer files over a TCP/IP network.

Gateway

A device that interconnects networks with different, incompatible communications 

protocols.

Half Duplex

Data transmission that can occur in two directions over a single line, but only one direction 

at a time.

Hardware

The physical aspect of computers, telecommunications and other information technology 

devices.

HTTP (HyperText 

Transport Protocol)

The communications protocol used to connect to servers on the World Wide Web.

Infrastructure

A wireless network that is bridged to a wired network via an access point.

IP (Internet Protocol)

A protocol used to send data over a network.

IP Address

The address used to identify a computer or device on a network.

IPSec (Internet Protocol 

Security)

A VPN protocol used to implement secure exchange of packets at the IP layer.

ISM band

(Industrial Scientific 

Medical band). 

A license-free portion of the spectrum open to all users.

LAN

The computers and networking products that make up a local area network.

MAC (Media Access 

Control) Address

The unique address that a manufacturer assigns to each networking device.

Mbps (MegaBits Per 

Second)

One million bits per second; a unit of measurement for data transmission.

Network

A series of computers or devices connected for the purpose of data sharing, storage, and/

or transmission between users.

Node

A network junction or connection point, typically a computer or work station.

Packet

A unit of data sent over a network.

Passphrase

Used much like a password, a passphrase simplifies the WEP encryption process by 

automatically generating the WEP encryption keys.

Ping (Packet INternet 

Groper)

An Internet utility used to determine whether a particular IP address is connected to the 

network.

RSPSupply  -  1-888-532-2706 -  www.RSPSupply.com

http://www.RSPSupply.com/p-12970-Phoenix-Contact-2900016-Radio-900-MHz-Ethernet-Radio.aspx

Summary of Contents for MOTR-9 RAD-ISM-900-EN-BD



























































































































Reviews: