5756B
29
To transmit INTERBUS process data between the controller
board and the PLC, you can parameterize data records in
IBS CMD. These data records define data blocks which
belong together and can be transferred in the application
program using driver blocks.
6. In the "Controller Board Settings... IBS Data Records"
dialog box, store the parameters required for the optimum
integration of the controller board in the PLC.
Figure 25
"Controller Board Settings... IBS Data Records"
dialog box
The following parameters can be set in the input and output
area:
Record
Select the number of the data record for
which the parameters are being set. To set
the parameters for a data record, select the
corresponding checkbox next to the
destination/source pointer in the bottom part
of the dialog box. You may define a maximum
of four input and four output data records.
Area
Set the destination area (E, DB or M) or the
source area (A, DB or M) in the PLC.
Data block
Enter the number of a destination or source
data block if you have selected DB as the
area.
