Phoenix Contact AXC 3050, User Manual

Page: 29 / 146

Description of the AXC 3050 controller
8686_en_01 PHOENIX CONTACT
29
2.10 Interfaces
This section describes the interfaces of the controller, including the possible communication
paths.
2.10.1 Communication paths
The communication path to the AXC 3050 controller must be determined before communi-
cation with the controller can take place.
The following communication paths are available on the controller:
Figure 2-12 Communication paths: (1) Ethernet, (2) USB
Key:
(1) 3 x Ethernet X1/X2/X3: RJ45 sockets (10/100 BASE-T(X))
X1, X2 or X3: PROFINET device interface (optional)
X3: PROFINET controller interface
(2) 1 x USB X4: Micro USB B socket
You can connect the service/programming interface directly with a
free USB port on your PC.
8686A005
1
2
For further information on MAC addresses of the Ether-
net interfaces and their IP address settings, refer to
Section “Assigning IP addresses for the controller” on
page 48.
For additional information on using the USB interface
(e.g., IP address assignment), please refer to Section
“PROG service/programming interface (X4: Micro USB
B socket)” on page 31.