Philips UPC Direct DSR4101/58, User Manual

Page: 37 / 162

English
SETUP 37
Checking the signal quality
You use this screen to confirm that your set-top box is receiving a
satellite signal on the LNB positions available to it.
To check the signal:
1. On the Signal Settings menu, highlight ‘Signal Quality’, and
then press OK .
The Signal Quality screen displays.
The details on the screen show the strength and quality of the
signal being received from the satellite.
The strength and quality of the signal received by your set-top
box must be of at least 60% in order to successfully find channels.
That is, the signal strength and signal quality bars should both be
at least about two thirds full.
Channel auto-search
Once you have confirmed the satellite signal strength, if you have
changed your Home transponder configuration, you need to
search for channels.
To search for channels:
1. On the Signal Settings menu, highlight ‘Channel auto-search’,
and then press OK .
The Auto Search screen displays.
2. To start the automatic channel search, press OK .
DSR 4101_02/2005.qxd 4/02/05 8:13 Page 37