Philips UPC Direct DSR4101/58, User Manual

Page: 26 / 162

English
26 DAY
-
TO
-
DAY OPERATION
To record a satellite programme:
1. Make sure your set-top box is switched on and tuned to the
channel you wish to record.
2. Set your VCR correctly to record at the appropriate time,
making sure that your VCR is set to record its ‘channel for
digital satellite TV’, or if your set-top box is connected to your
VCR via a SCART lead, making sure your VCR is set to record
its appropriate AV channel.
For further information about your VCR, refer to your VCR’s User
Guide.
Notes: Your VCR must be correctly connected to your set-top box.
For further information, see page 11.
Some programmes are copy-protected and may not play back correctly
if you record them.
While you are setting the recording up, you may wish to make sure
your TV is switched to its ‘VCR channel’ or the AV channel that you use
when you are watching videos, so you can check that the VCR is
showing what you want to record.
Watching other channels while you are
recording a digital satellite programme
If your equipment is connected using RF leads, as in connection
methods 1 or 2, you can watch any terrestrial channel while you
record digital satellite TV, by changing channel with your TV’s
remote control.
You can also watch any digital channel while you record a
terrestrial channel.
However, you cannot watch one digital channel while you record
a different digital channel. If you use your set-top box’s remote
control to change channel while you are recording, your VCR will
record the channel change.
DSR 4101_02/2005.qxd 4/02/05 8:13 Page 26