Input settings
The DVD recorder system allows you to connect a varity
of equipment: a satellite receiver or set-top box, a VCR, a
CD player etc. Please set to which input sockets you
connected the equipment.
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
3
Press
1
as often as necessary to select
A
.
4
Press
4
or
3
as often as necessary to select
y
Installation
. Next, press
2
to confirm.
5
Press
4
or
3
as often as necessary to select
Audio Video
Input
. Next, press
2
to confirm.
6
Press
4
as often as necessary to select SAT,VCR, GAME or
TV, CD, CDR,TAPE.
7
Perform the following settings for the selected source.
Settings for SAT,VCR, GAME
For each of these AV sources you can do two settings:
–
AV source
: Select the input to be used for recording
from the equipment or for playing its sound.
–
Additional audio
: Select the input which should be
used preferably for playing the sound of the equipment.
E. g. if you connected the equipment to one of the digital
audio inputs to enjoy digital surround sound on the
DVD recorder system.
If you did not connect this kind of equipment, select
None
for both,
AV source
and
Additional audio
.
1
Press
2
to enter the menu.
➜
AV Source
is highlighted.
2
Press
2
as often as necessary to select
–
EXT1
or
EXT2
: the AV input to which you connected
the equipment.The DVD recorder system will use this
input for recording from the equipment.
–
None
: if you did not connect this kind of equipment or
if you connected it to one of the audio inputs only. In this
case, recording from the equipment is not possible.
3
Press
4
to select
Additional Audio
.
4
Press
2
as often as necessary to select
–
DIG
or
OPT
: if you connected the digital audio output
of the equipment to IN DIGITAL or IN OPTICAL.
You need a digital connection to play digital (surround)
sound on the DVD recorder system.
–
None
: if you did not connect the equipment at all or if
you did not connect it to IN DIGITAL or IN OPTICAL.
–
LIN1
,
LIN2
(only available if you selected
None
for
AV Source
above): if you connected the audio output
of the equipment to LIN1 or LIN2 without a video
connection to the DVD recorder system.
5
Press OK to store the settings or SYSTEM MENU to exit
without storing.
System settings
54
English
SAT
>
VCR
>
GAME
>
TV
< EXT1 >
TAPE
< LIN2 >
CDR
< LIN1 >
CD
< DIG >
To exit press
SYSTEM MENU
Installation
Audio video input
AV Source
EXT2
Additional Audio
<None>
To exit press
SYSTEM MENU
Installation
VCR
