Programming a recording with
the ShowView
®
system
You do not need to tediously enter the date, the
programme number, the start and end time. All information
needed for programming is contained in the ShowView
®
programming number.You can find this number in most of
the TV magazines, indicated next to the start time of the
TV programme.
1
Switch your TV set on. If necessary set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
2
Press and hold DVD/MON for 1 second.
3
Press TIMER.
4
Press
4
or
3
as often as necessary to select the line
ShowView system
.
5
Press
2
to confirm the selection.
6
Use the numerical buttons to enter the ShowView
®
programming number.This number is up to 9 digits long, e.g.
for 5-312-4 or 5 312 4 enter 53124.
0
0
To clear, in case you made a mistake, press CLEAR.
0
0
If you wish your recording to be repeated, press RETURN
as often as necessary to select the desired option:
➜
Mo-Fr
: for recordings to be repeated daily from Monday
to Friday
➜
Weekly
: for recordings to be repeated weekly (every
week on the same day)
7
Press OK to confirm.
➜
The timer programme appears.
Notes:
If
ShowView number wrong
is displayed, the keyed in
ShowView
®
programming number is incorrect. Check time and
date on the DVD recorder system. Repeat your entry correctly
or end programming by pressing
SYSTEM MENU.
If
Please enter programme number
is displayed, the
programme number of the TV channel has not yet been
allocated to the ShowView
®
programming number. Select the
appropriate programme number of the TV channel using
1
,
2
or the numerical keys on the remote control and confirm by
pressing OK.
If daily recording was entered for a wrong day,
Weekend
programming not possible
is displayed. Make sure to
enter a day from Monday to Friday.
0
0
To change the timer programme, you can go back at any
time. Use
1
or
2
to select the appropriate input field. Use
4
or
3
, or the numerical buttons to change the
information.
0
0
To switch on VPS/PDC press
2
to select
Start
. Press
RETURN as often as necessary until
8
lights up.
➜
VPS/PDC is switched on.
Note: The ShowView
®
system does not take the later starting
of a TV programme into account.To compensate for a later
starting time, switch on VPS/PDC.
0
0
To change the recording mode press
2
to select
End
.
Press RETURN as often as necessary to select the desired
recording mode.
8
Press OK again to store the entire programming
information.
➜
The entire programming information is stored.
0
0
To exit the timer without storing press TIMER repeatedly.
9
Press TIMER to end.
10
Load a disc on which you want to record in the tray.
11
On a DVD+RW select an empty title at the end of
the disc. Otherwise previous recordings may be
overwritten.
12
A timer recording will only start if you have switched
the DVD recorder system to standby or if you have
selected TUNER, CD, CDR or TAPE:
Press
2
or
TUNER, CD, CDR or TAPE.
➜
If any recordings are programmed,
TIMER
lights up.
0
0
To stop a running timer recording before the scheduled
end, press
9
on the DVD recorder system.
Timer recording
34
English
VPS
Rec
Date Prog. Start
PDC
End
Mode
19
PHI
8:00
9:00
M2
To store
Press OK
Mo-Fr/Weekly
Press RETURN
Timer
ShowView system
