Adjusting the volume of all
speakers
●
Press VOL+ or VOL– or turn VOLUME on the DVD
recorder system to adjust the volume.
➜
VOLUME
and the actual volume level are displayed.
0
0
To switch off the sound on the DVD recorder system,
press MUTE.
➜
MUTE
is displayed.
0
0
To switch the sound on again, press MUTE again.
0
0
To switch off the sound on your Philips TV,
press MUTE while you press and hold SHIFT.
Adjusting the volume of the rear
speakers and of the subwoofer
●
While you press and hold SHIFT:
Adjust the subwoofer volume with 2 / SUB+ and 5 / SUB–.
Adust the rear volume with 8 / REAR+ and 0 / REAR–.
Adjusting bass and treble
●
While you press and hold SHIFT:
Adjust the bass with 1/ BASS+ and 4 / BASS–.
Adjust the treble with 3 / and 6 / TREBLE–.
Loudness
Loudness enhances bass and treble at low volume.
●
While you press and hold SHIFT: Press 7 / LOUDNESS
repeatedly to switch loudness on or off.
➜
LOUDNESS ON
or
OFF
is displayed on the DVD
recorder system.
Volume balance between the
speakers
If a speaker appears too loud or too quiet in comparison to
the rest of the speakers, you can adjust the volume balance
between the speakers.
1
Press and hold DVD/MON for 1 second.
2
Press SYSTEM MENU.
3
Press
1
as often as necessary to select
A
.
4
Press
4
or
3
as often as necessary to select
y
Installation
. Next, press
2
to confirm.
5
Press
4
or
3
as often as necessary to select
Audio setup
. Next, press
2
to confirm.
6
Press
4
to select
Speaker balance
. Next, press
2
to
confirm.
➜
Test tone
is highlighted.
7
Press
2
as often as necessary to select
Yes
.
➜
The test tone is played on each speaker for a short time.
Note:The test tone is not available for adjusting the subwoofer
volume.
8
Press
4
or
3
as often as necessary to select the speaker
which appears too quiet or too loud:
Front left
,
Front
right
,
Center
,
Rear left
, or
Rear right
.
9
Press
1
or
2
repeatedly to adjust the volume of the
selected speaker (values between
-6
and
+6
).
10
Press OK to store the setting or SYSTEM MENU to exit
without storing.
0
0
To adjust the volume of another speaker, repeat steps 8–10.
11
Press SYSTEM MENU to end.
Note: If you did not connect the centre or the rear speakers,
please change the speaker settings in chapter “Speaker setup”
on page 55 accordingly.
Volume and sound
20
English
Test tone
< On >
Front left
< +1
>
Front right
< +1
>
Center
<
0
>
Rear left
<
0
>
Rear right
<
0
>
Subwoofer
<
0
>
To exit press
SYSTEM MENU
Audio setup
Speaker balance
