Case 2: Component Video /
Progressive Scan connection
This DVD recorder system supports Progressive Scan
(“PAL Progressive” or similar).
To appreciate the flexibility of the Scart connection and the
high picture quality of Progressive Scan, it is recommended
to connect both, Scart (EXT-1 TO TV-I/O) and the
Component Video / Progressive Scan output of the DVD
recorder system to your TV.
Use the Progressive Scan connection (FOR PLAYBACK /
VIDEO OUT COMPONENT Y P
B
P
R
) when playing a disc
on the DVD recorder system. Use the Scart connection
when playing connected equipment (SAT,VCR, GAME,
CAM1/2). Please consult the user manual of your TV on
how to switch between the Scart and the Progressive Scan
input of the TV.
1
Check the user manual of your TV on which AV input is
suited for Progressive Scan. Usually, these sockets are green,
blue and red and are labelled Y P
B
P
R
or Y C
B
C
R
.
If your TV is not suited for Progressive Scan, only connect
Scart (See “Case 1: Scart connection”).
2
Connect FOR PLAYBACK / VIDEO OUT COMPONENT
Y P
B
P
R
on the DVD recorder system to the Progressive
Scan input of the TV with a Component Video cable (red,
green and blue plugs). Match the colours of the cable plugs
to the sockets.
3
Connect the Scart socket of the TV to EXT-1 TO TV-I/O on
the DVD recorder system with the supplied Scart cable.
See “Case 1: Scart connection” on page 13.
0
0
If you decide not to connect Scart, connect the audio
output of the TV to AUDIO LIN1 L/R or LIN2 L/R to play
the sound of your TV on the speakers of the DVD recorder
system. With the Scart connection, this is not necessary.
Please be aware that some TVs switch automatically from
the Progressive Scan input to the Scart input as soon as a
signal is available on the Scart input. In this case you have to
select the Progressive Scan input on your TV again. If your
TV repeatedly switches from the Progressive Scan input to
the Scart input, disconnect the Component Video cable and
use the Scart connection only.
Switching the DVD recorder system to
Progressive Scan
If you connected a Progressive Scan capable TV to the
DVD recorder system, you need to switch the DVD
recorder system to Progressive Scan.
1
Disconnect the DVD recorder system from the mains
supply.
2
Wait for 20 seconds.
3
Press and hold
4
on the DVD recorder system while
you reconnect the DVD recorder system to the mains
supply. Hold
4
until
DVD
is displayed on the DVD
recorder system.
4
Press
2
on the set to switch on the DVD recorder
system.
➜
PRO
appears on the display of the DVD recorder system.
The Component Video output (Y P
B
P
R
) of the DVD
recorder system is switched to Progressive Scan.
0
0
To switch off Progressive Scan on the DVD recorder
system, repeat steps 1–4.
➜
PRO
disappears.
Note:You can switch the DVD recorder system from Interlaced
to Progressive Scan also in the system menu. See
t
Picture
➜
Component video output
on page 47.
If the TV does not switch automatically to Progressive
Scan or if it is not suited for Progressive Scan, no
picture may be available after switching the DVD
recorder system to Progressive Scan.
Connecting the TV
14
English
VIDEO OUT COMPONENT
FOR PLAYBACK
EXT1 IN
EXT2 IN
ANTENNA IN
TV
