Philips LBB 1330, Instructions For Use Manual

Page: 36 / 140

4. OPERATING AND PROGRAMMING THE SM40 SYSTEM
4-14
4
User Programming Menu: Program Timers: Program Time Signals
Status / Action
The display shows the following:
Press the ‘ 3 ’ key.
Display shown when the ‘ 2 ’ key is pressed.
Display shown when the ‘ 2 ’ key is pressed.
but no signal generator is present:
Press ‘ Enter ’ when the error message was
shown to return to the Main User Menu.
Display shown when the ‘ 2 ’ key is pressed.
and a signal generator is present:
When a valid program number is entered, the
display shows:
Result / Remarks
Time Signals (30 max.) are treated by the system as ‘Calls’, with their own priority
(set at priority 0). This means that a time signal can be overruled by a call with a
higher priority.
When a time signal activates, and there is no Signal Generator available, the system
will wait until there is a free generator and then generate the signal.
When a Call Station is calling the same zone to which the signal is routed, the time
signal will be delayed until there is no more zone conflict.
When several time signals are programmed to sound at the same time, and there are
not enough generators available, the signals will be activated sequentially.
Note: Because a signal generator is required for this particular function, this error is
of the class ‘Fatal Error’.
The cursor will blink at the tens of hours.
PROGRAMMING TIME SIGNALS DAYS:MTWTFSS
PRGM:XX TIME:0
_0:00 SIGNAL:XX 0000000
ENTER TIME SIGNAL PROGRAM NR (1-30):_
NO SIGNAL GENERATOR PRESENT IN SYSTEM
PRESS 'ENTER'
PRESS '1' TO PROGRAM RELAY/AUX-ROUTING
PRESS '2' TO PROGRAM TIME SIGNALS
PRESS '1' TO SET REAL-TIME CLOCK
PRESS '2' TO PROGRAM TIMERS
* USER MENU * scroll with 'ENTER'
PRESS '3' TO SET REAL-TIME CLOCK/TIMERS