Philips LBB 1330, Instructions For Use Manual

Page: 50 / 140

4. OPERATING AND PROGRAMMING THE SM40 SYSTEM
4-28
4
Status / Action
Otherwise, the display shows:
Enter the first of the range of key set inputs:
xx =17,21,25, 29 for master 1,2,3,4.
Enter the number of key sets.
If the corresponding slave Input Card is not
present the display shows:
Otherwise, when the required number of
inputs is not available the display shows:
Otherwise, when the inputs are accepted the
display shows:
After pressing either ‘ 1 ’ or ‘ 0 ’, the display
shows:
Press ‘ Enter ’ to couple or uncouple another
Extended Call Station:
Otherwise, press ‘ Break ’ to return to the
following display:
Result / Remarks
Selecting ‘1’ will couple the selected range of key set inputs, ‘0’ will uncouple the
selected range.
PRESS '1' TO CONFIGURE EXTENDED CST
PRESS '2' TO CONFIGURE MASTER CST
COUPLE/UNCOUPLE EXTENDED CST (1-4):_
CURRENT EXTENDED CALL STATION ASSIGNMENT
INPUT 17-32 ECS: 1110 2220 XXXX 0000
PRESS '1' TO COUPLE; '0' TO UNCOUPLE
** NOT ALL SELECTED INPUTS PRESENT **
PRESS 'ENTER'
*** ERROR *** INPUT CARD X NOT PRESENT
PRESS 'ENTER'
ENTER FIRST KEY SET INPUT (17-32):XX
ENTER NUMBER OF KEYSETS (1-4)