Philips LBB 1330, Instructions For Use Manual

Page: 75 / 140

5. SM40 MODULES
5-15
5
Signal Set: III: Dedicated German Signals
CHIME TONES
Stop after pre-programmed duration, unless user key is released.
01 1-tone chime; frequency 440 Hz.
02 2-tone chime; frequencies 554 & 440 Hz
03 3-tone chime; frequencies 392, 523 & 659 Hz
04 3-tone chime; frequencies 659, 523 & 392 Hz
05 4-tone chime; frequencies 554, 440, 493 & 330 Hz
06 4-tone chime; frequencies 659, 523, 392 & 330 Hz
07 Mixed-tone chime; frequencies 440 & 554 Hz
08 4-tone chime; frequencies 196, 262, 330 & 392 Hz
ALARM SIGNALS
Stop when user key is released, or where a time is noted below: the signal continues to the end of that duration even though
the key is released.
64 DIN alarm:
Sweeping signal from 1200 down to 500 Hz in 1 second and repeating.
65 DIN alarm:
Sweeping signal from 1200 down to 500 Hz in 1 second and repeating. Signal duration: 60 seconds.
Signals 66-69 are not available in this signal set.
70 End of alarm.
Start frequency 100 Hz, sweeping up to 420 Hz, holding that frequency for 60 seconds, sweeping down to 100 Hz
and ending.
71 Fire alarm.
Start frequency 100 Hz, sweeping up to 420 Hz, holding that frequency for 10 seconds, sweeping down to 300 Hz, holding
that frequency for 10 seconds and repeating this cycle until 60 seconds are passed. Then sweeping down to 100 Hz
and ending.
Signals 72-75 are not available in this signal set.
76 Air alarm.
Start frequency 100 Hz, sweeping up to 420 Hz, sweeping down and up between 300 and 420 Hz until 60 seconds have
passed. Then sweeping down to 100 Hz and ending.
77 ABC alarm.
Start frequency 100 Hz, sweeping up to 420 Hz, sweeping down and up between 300 and 420 Hz during 10 seconds,
sweeping down to 100 Hz and holding that frequency during 10 seconds and repeat sweep cycle until 60 seconds have
passed. Then sweeping down to 100 Hz and ending.
Signals 78-83 are not available in this signal set.