Philips LBB 1330, Instructions For Use Manual

Page: 35 / 140

4. OPERATING AND PROGRAMMING THE SM40 SYSTEM
4-13
4
User Programming Menu: Program Timers: Program Relays
Status / Action
The display shows the following:
Press the ‘ 3 ’ key.
Display shown when the ‘ 2 ’ key is pressed.
Display shown when the ‘ 1 ’ key is pressed.
Display shown after pressing the ‘ 2 ’ key, and
when Unlocked Relay Card U-3 is not in the
system.
Press ‘ Enter ’ when the error message was
shown to return to the Main User Menu.
Display shown after pressing the ‘ 2 ’ key, and
when Unlocked Relay Card U-3 is in the
system.
Result / Remarks
Note: Because card CRC U-3 is required for this particular function, this error is of
the class ‘Fatal Error’.
Programming relays is similar to programming the matrix timers, except that after
entering the time, the display returns with the next relay-program instead of
programming the matrix routing.
Every relay can be programmed to activate and de-activate 10 times a day.
Unlocked Relay Card U-3 has 8 relays, therefore the total number of relay timers
is 80.
ENTER RELAY NUMBER (1-8):_
**ERROR** UNLOCKED CRC3 NOT IN SYSTEM
PRESS 'ENTER'
PRESS '1' TO PROGRAM AUXILIARY ROUTING
PRESS '2' TO PROGRAM RELAYS
PRESS '1' TO PROGRAM RELAY/AUX-ROUTING
PRESS '2' TO PROGRAM TIME SIGNALS
PRESS '1' TO SET REAL-TIME CLOCK
PRESS '2' TO PROGRAM TIMERS
* USER MENU * scroll with 'ENTER'
PRESS '3' TO SET REAL-TIME CLOCK/TIMERS