19
English
EN
Soft fruit juicer (HR7974 only)
Before you start, make sure that you assemble
according to Fig. 9
You can use the soft fruits juicer to juice soft
fruits such as tomatoes, oranges and grapes.
You are not recommended to juice hard fruits
such as apples and pears.
Warning
•
Be careful when you handle or clean the sieve. The
cutting edges are very sharp.
•
Users should be aware that the maximum
recommended running time is up to 2 minutes.
Caution
•
Never insert your hand or another object (e.g. a fork,
knife, spoon or spatula) into the feeding tube. Only use
the pusher supplied with the appliance for this purpose.
•
Wait until the screw in the masticating tube has stopped
rotating before you take off the tool from the main unit.
•
Thoroughly clean the soft fruit juicer before you use it
for the first time.
Note
•
Always check the screw before use. Do not use the
juicer if you notice any damage like cracks, grazes or a
loose grating disc.
•
Before processing ingredients, remove all seeds and
pips from plums, apricots, peaches and cherries, remove
all tough skins from pineapples, melons etc.
Tip
•
You can get a lot more juice if you run the pulp
through a few times.
Cookie maker (HR7976 only)
Before you start, make sure that you assemble
according to Fig. 7-2.
You can use the cookie maker to cut biscuit
dough into the desired shape.
Note
•
Follow the recommended quantities, processing time
and speed for the ingredients as indicated in Fig 10.
Tip
•
Align different holes of the cookie cutter with the hole on
the cookie separator to make cookies of different shapes.
Mill
Before you start, make sure that you assemble
according to Fig. 8.
You can use the mill to chop/grind coffee
beans, peppercorns, nuts, herbs, dried fruits etc.
Dried fruits such as figs can be chopped and
use as toppings for yoghurt or spread for your
bread or biscuit.
For best results when processing dried black
Mission figs, use max of 85g at speed P for
3 seconds.
Note
•
Follow the recommended quantities, processing time
and speed for the ingredients as indicated in Fig 10.
•
Do not exceed the maximum level of the mill jar.
•
You can order a mill (under service code 96510070528
and 996510070501) from your Philips dealer or a
Philips service center as an extra accessory.
Tip
•
Before opening the mill with processed ingredients
1. Hold the mill jar upside down.
2. Tap the mill jar a few times.
3. Remove the blade assembly slowly.
