Philips HR1378, User Manual

Page: 8 / 180

8
4
Fasten the motor unit onto the chopper
bowl (‘click’).
5
Slide the safety switch downwards (1), hold
it in position and press the on/off button (2)
to switch on the appliance.
You can release the safety switch when the
appliance starts to operate.
If you want to chop pulsing, keep the safety
switch pressed downwards and press the
on/off button a few times in quick succession.
D
Note:
If you do not press the on/off button within
2 seconds after sliding the safety switch
downwards, the indicator lights start to flash
red (see section ‘Error mode’ in chapter
‘Getting started’).
1
2
1
2
the charger to prevent the batteries from
running low.
4.2 Chopping
B
Warning:
Be careful when you handle the blade unit,
the blades are very sharp. Be particularly
careful when you remove the blade unit from
the chopper bowl, when you empty the chopper
bowl and during cleaning.
The chopper is intended for chopping ingredients
such as nuts, meat, onions, hard cheese, boiled
eggs, garlic, herbs, dry bread etc.
Use the serrated blade unit to crush ice.
1
Put the chopper blade unit in the chopper
bowl.
2
Put the ingredients in the chopper bowl (see
chapter ‘Getting started’, section ‘Prepare
the food’).
See the table for the recommended
quantities and processing times.
Ingredients Quantity Time
Onions 200g 5sec.
Meat & fish 200g 10sec.
Boiled eggs 2 eggs 4sec.
herbs 30g 10sec.
Almonds 200g 30sec.
Dry bread 80g 30sec.
Parmesan cheese 200g 20sec.
Dark chocolate 100g 20sec.
Ice cubes pieces 10sec.
3
Put the coupling unit on the chopper bowl.
•