- 40 -
Note: a guest in the room will
never see this reboot. The
internal reboot will happen at
1AM (in case the TV is not in use at that
time) in order to avoid hang-ups after
longer period. Hence you should never
turn this off
o
[Auto Standby]: If any value bigger
than [0] is set, the TV will go to STBY by
itself after 10 minutes if no video signal
is there. If there is video signal, the TV
will go to STBY if no user interaction is
there for the time set using the slider
between [30] and [240] minutes. You
can also put this [0] to disable the TV to
go to STBY.
o
[LED Power indicator]: If [On], the
power LED will be red while the TV is in
standby. When [Off], there will be no
power LED indication.
o
Navigate to the [Security] menu
o
You will see below items:
o
[Professional Menu PIN Lock]: When
[On] you can set a 5 digits PIN code to
lock the professional menu, when
entering the professional menu using
the key sequence you will need to
enter the 5 digits, when [Off], this is
disabled
(The Professional Menu PIN
lock is only valid for use by the
Guest RC. Using the Master RC
it is still possible to enter the
Professional Menu regardless of this
setting.)
o
[High Security]: When [On], the
professional setup menu can only be
accessed by the Master RC and not
using the key sequence via a Guest RC,
when [Off] you can use both
o
Navigate to the [UI] [Display OSD] menu
o
You will see below items:
o
[No]: No OSD will be shown, you will
not be able to enter any menu
o
[Yes]: All OSD and menus can be seen
and accessed
