Philips HDR3700 User Manual Download

Page: 3 / 100

This product complies with the radio interference
requirements of the European Community. This
product complies with the requirements of the
following directives and guidelines: 2006/95/EC,
2004/108/EC.

Philips Consumer Electronics

Philips, Glaslaan 25616 JB Eindhoven,

The Netherlands

Recycle Notice

Copyright Notice

This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorised by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local recycling
regulations.
This product consists of materials which
can be recycled and reused if
disassembled by a specialised company.

Following information is only for EU-member states:

The use of the symbol indicates that this product
may not be treated as household waste.
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be
caused by inappropriate waste
handling of this product. For more
detailed information about recycling
of this product, please contact your
local city office, your household
waste disposal service or the shop
where you purchased the product.

Pb, Hg, Cd

Following information is only valid
EU-member States:
Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symbol
indicates that batteries and/or accumulators must
be collected and disposed of separately from
household waste.
If the battery or accumulator contains more than
the specified values of lead (Pb), mercury (Hg),
and/or cadmium (Cd) defined in the Battery
Directive (2006/66/EC), then the chemical
symbols for lead (Pb), mercury (Hg) and/or
cadmium (Cd) will appear below the crossed out
wheeled dust bin symbol.
By participating in separate collection of batteries,
you will help to assure the proper disposal of
products and batteries and thus help to prevent
potential negative consequences for
the environment and human health.
For more detailed information about
the collection and recycling
programmes available in your
country, please contact your local
city office or the shop where you
purchased the product.

Important Notes for Users in U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp
plug. To change a fuse in this type of plug proceed as
follows:
1. Remove fuse cover and fuse.
2. Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fi tted in its
place.
If the mains plug contains a fuse, this should have a
value of 5 Amp. If a plug without a fuse is used, the
fuse at the distribution board should not be greater
than 5 Amp.
Note: The severed plug must be disposed off to avoid
a possible shock hazard should it be insertedinto a 13
Amp socket elsewhere.

Mains plug

The wires in the mains lead are coloured with the
following code: blue = neutral (N),
brown = live (L).
• As these colours may not correspond with the

• Connect the blue wire to the terminal

• Connect the brown wire to the terminal

• Do not connect either wire to the earth terminal in

Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.

colour markings identifying the terminals in your
plug, proceed as follows:

marked N or coloured black.

marked L or coloured red.

the plug, marked E (or e) or coloured green (or
green and yellow).

Installation Location

For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position.
• Keep the unit away from electronic equipment
such as an amplifier, TV, etc. to prevent warping,
damage, fire and malfunction.

• Shield the unit from direct sunlight and keep away

from sources of intense heat. Avoid dusty or humid
locations. Avoid locations with insufficient ventilation
for suitable heat dissipation. Do not block the
ventilation holes on the sides of the unit. Avoid
locations subject to strong vibration or strong
magnetic fields.

• Do not place anything directly on top of the unit.

od
uct

ion

Con

ec
ti

on
s

Ini

tial

Setu

layb

ack

Edi