65BDL4052E/75BDL4052E/86BDL4052E
61
9.2.3. Audio menu
Picture
Screen
Audio
Con�guration
Advanced
Android Settings
50
50
50
4
20
100
0
Off
Action
Off
On
Balance
Treble
Bass
Volume
Audio out (line out)
Maximum volume
Minimum volume
Mute
Audio reset
Audio Out Sync
Speaker Settings
Balance
Adjust to emphasize left or right audio output balance.
Note: Only can adjust balance for speaker output.
Treble
Adjust to increase or decrease higher-pitched sounds.
Bass
Adjust to increase or decrease lower-pitched sounds.
Volume
Adjust the volume.
Audio Out (line out)
Adjust to increase or decrease the line out audio output level
(volume).
Note: This function will be disabled when Audio Out Sync is
ON.
Maximum volume
Adjust limitation for the maximum volume setting.
Minimum Volume
Adjust limitation for the minimum volume setting.
Mute
Turn the mute function on/off.
Audio reset
Reset all settings in the Audio menu to factory preset values.
Audio Out Sync
Line out volume sync with internal speaker Volume.
{On}: Enable the function and gray out Audio Out (line out)
Volume.
{Off}: Disable the function.
Speaker Setting
Turn internal speaker {On}/{Off}.
9.2.4. Configuration menu
Picture
Screen
Audio
Con�guration
Advanced
Android Settings
Switch on state
Panel saving
RS232 routing
Boot on source
Logo
WOL
Light sensor
Human sensor
HDMI version
Information OSD
Monitor ID
Heat status
Con�guration reset
Force on
Action
RS232
Action
On
Off
Off
Off
10
Action
xxxxxx
Action
Switch on state
Select the display status when you connect the power cord
next time.
•
{Power off} - The display will remain off when the power
cord is connected.
• {Forced on} - The display will turn on when the power
cord is connected.
• {Last status} - The display will return to the previous
power status (on/off/standby mode) when the power
cord is connected.
Panel saving
Choose to enable the panel saving functions and thus reduce
the risk of image persistence or ghost imaging.
• {Brightness} - Select {On} and the image brightness will
reduce to an appropriate level. The Brightness setting in
the Picture menu cannot be changed when this setting is
enabled.
• {Pixel Shift} - Select the time interval ({Auto}, {10-900}
seconds, {Off}) for display to slightly expand the image
size and shift the position of pixels in four directions (up,
down, left and right). Activating pixel shift will disable H
position, V position and Zoom mode in Screen menu.
Note: Video source only.
RS232 routing
Select RS232 routing path
• {RS232} – RS232 is routed from 2.5mm phone jack
•
{LAN->RS232} – RS232 is routed from RJ45
• {OPS RS232} – RS232 is routed from OPS
Boot on source
Choose to select a source when booting up.
• {Input} – Select input source when booting up.
• {Playlist} – Select playlist index for Media Player, Browser.
0 indicates there is no playlist.
Logo
Choose to enable or disable the picture of Logo when
turning on your display.
•
{Off} – Both static Philips logo and Android boot
animation will not be shown.
• {On} – Default value. Both Philips logo and Android boot
animation will be shown.
