65BDL4052E/75BDL4052E/86BDL4052E
40
Step 2. Copy pdfplaylistX.txt to “philips” folder of internal
storage. You may use FTP to do this.
- File path : /storage/emulated/legacy/philips (for DL,
PL)
Ex. /storage/emulated/legacy/philips/pdfplaylist1.txt
Step 3. Prepare the PDF files in “PDF” folder which is
under “Philips” folder of your internal storage.
- Ex. /storage/emulated/legacy/philips/pdf/xxx.pdf
/storage/emulated/legacy/philips/pdf/yyy.pdf
/storage/emulated/legacy/philips/pdf/zzz.pdf
Step 4. Start the PDF player App, it will import the text file
of PDF player automatically.
Note: Once the playlist file (text) is imported, any changes
made through the remote control will not be recorded in
the playlist text file.
Media Hotkey:
Play: Playback file.
Pause: Pause playback.
Fast forward: go to the next page. If the page is at end of
the file, it will go to the next file.
Rewind: back to the last page. If the page is at beginning
of the file, it will to back to the last file.
Stop: Return to the first page of file.
Arrow keys:
Left: go to the previous page.
Right: go to the next page.
Combination key:
Number key + OK key: change to a specific page.
- Press number key to select a specific page.
- Press
“OK”
key. Page number will display at the bottom
of the page. If the page number you selected exceeds
total page number, then that page will not be changed,
but display current page number instead.
Note:
If you plug in two or more USB disks to edit the playlist,
playback from the playlist cannot be guaranteed after
powering on/off, due to the USB storage path may be
changed. It is strongly recommended to use only one USB
disk when editing the playlist.
5.7. CMND & Play
1) Server
Setup CMND & Play server address
2) Account
Setup CMND & Play account
3) PIN Code
Setup CMND & Play PIN code
(4) Version
There are two options, Ver.2 and Ver.3
Ver. 2
use 2.0/2.2 agreement
Ver. 3
use 3.0/3.1 agreement
(5) Content
There are 3 options available: internal storage, SD card
and USB storage.
If Ver.2, is selected, Server/Account/PIN code will be
shown in gray and cannot be set.
