0
E
n
g
li
sh
1
RF
S-VIDEO
OUT
IN
AUDIO
R L
VIDEO
CABLE
SATELLITE
ANTENNA
Back of a Cable
Box or Satellite
Receiver (Example
only)
VIDEO
IN
OUT
IN
AUDIO
L
AUDIO
R
VIDEO
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
S-VIDEO
Back of a VCR
(Example only)
Front Panel of
HDD recorder
Step 2: Optional Connections
(continued)
D
Use the supplied audio/video cables to
connect the
VIDEO/AUDIO IN
jacks
on the recorder to the matching
VIDEO/AUDIO
output jacks on the
Cable Box/ Satellite Receiver.
E
Use the audio/video cables to connect
the
VIDEO/AUDIO OUT
on the
recorder to the matching
VIDEO/
AUDIO
input jacks on the TV.
F
Use another set of audio/video cables to
connect the
VIDEO IN/L-AUDIO-R
jacks on the front panel of the recorder
to the to the matching
VIDEO/AUDIO
output jacks on the VCR.
TIPS:
Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
TIPS:
Before making or changing any connections, make sure that all the devices are disconnected from the power
outlet.
Step 2: Optional Connections
(continued)
B
Connecting a camcorder to
the front jacks
You can use the front jacks to copy
camcorder recordings. These jacks are
located behind the flap on the right hand
side and provides convenient connections
for a camcorder.
Option 1: Using the
DV IN jack
Use this connection if you have a Digital
Video or Digital 8 camcorder. The DV
jack conforms to the i.LINK standard.
It provides the best picture quality.
l
Use an i.LINK 4-pin cable (not supplied)
to connect the
DV IN
jack on the
recorder to the appropriate
DV OUT
jack on the camcorder.
Before you start operating, press
DV/
USB
on the remote to select ‘DV’ as the
input channel. For recording, see pages
7~7.
Helpful Hints:
– The DV IN jack does not support a
connection to a Personal Computer.
– It is not possible to record from the
recorder to your camcorder via the
DV IN
jack on your recorder.
Option 2: Using the S-VIDEO In or
VIDEO In jack
Use the S-VIDEO connection if you have a
Hi8 or S-VHS(C) camcorder. It provides
good picture quality.
Alternatively, you can use the VIDEO
connection if your camcorder has only a
single video output (Composite Video,
CVBS.)
A
Connect the
S-VIDEO
or
VIDEO
jack
on the front panel of the recorder to the
corresponding
S-VHS
or
Video
output
jack on the camcorder.
B
Use an audio cable (red/white ends) to
connect the
AUDIO L/R
jacks on the
front panel of the recorder to the
Audio
output jacks on the camcorder.
Before you start operating, press
SOURCE
on the remote control
repeatedly to select ‘FP-CVBS’ or ‘FP-
SVIDEO’ as the input channel, depending
on your connections. For recording, see
pages ~4.
DV OUT
L
R
A
OR
