background image

- 8 -

When the battery is fully charged, the battery status light turns a 

continuous white�

12 hr

=

3 hr

eco

When you charge the parent unit for 3 hours, it can be used cordlessly for 

up to 12 hours in Eco mode.

If the parent unit is switched on during charging, charging takes 

approximately twice as long.

When the rechargeable battery of the parent unit is almost empty, the 

battery status light flashes orange and the low battery alert will sound.
If the parent unit battery is empty and is not connected to the mains, the 

parent unit will switch off and connection to the baby unit will be lost.

Note: Only remove the built-in rechargeable battery when you discard 

the appliance� It is recommended that only authorized parties remove 

the battery�

Note: If the battery runs low, the parent unit's low battery alert sound 

may wake you up�

Note: The battery gradually and very slowly discharges, even when the 

parent unit is switched off.
Tip: To save battery, switch off the parent unit when not in use.

Tip: Keep the parent unit connected to the mains during the night�

Summary of Contents for Avent SCD921











































Reviews: