Philips Avent SCD921 User Manual Download

Page: 5 / 42

- 5 -

Important safety information

Read this important information carefully before you use the appliance

and save it for future reference�

IMPORTANT

This baby monitor is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be used as

such.

Never leave your baby alone in your home� Always make sure there is

someone present to look after the baby and take care of its needs�

Disclaimer

Please note that you use this baby monitor at your own risk� Koninklijke

Philips N�V� and its subsidiary companies are not responsible for the

operation of this baby monitor or your use of it and therefore do not

accept any liability in connection with your use of this baby monitor�

Danger

- Never immerse any part of the baby monitor in water or any other

liquid� Do not place the appliance where water or any other liquid can

drip or splash onto it� Never use the baby monitor in moist places or

close to water�

- Never put any object on top of the baby monitor and do not cover

it� Do not block any ventilation openings� Install according to the

manufacturer's instructions�

Warning

- Long cable� Strangulation hazard!

- Check if the voltage indicated on the adapter corresponds to the local

mains voltage before you connect the appliance�

Do not modify or cut off any part of the adapter and its cord, as this

causes a hazardous situation�

- Only use the adapter supplied�
-

If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard�

- This appliance can be used by children aged from

8 years

and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and

understand the hazards involved� Children shall not play with the

appliance� Cleaning and user maintenance shall not be made by

children without supervision�

- Protect the mains cord from being walked on or pinched particularly at

plugs, and the point where they exit from the appliance.

- Make sure that you place the baby monitor in such a way that its cord

does not obstruct a doorway or passage� If you place the baby monitor

on a table or low cabinet, do not let the mains cord hang over the

edge of the table or cabinet� Make sure the cord does not lie on the

floor where it presents a tripping hazard.

Summary of Contents for Avent SCD921










































Search results

Summary of Contents for Avent SCD921

Reviews:

Related manuals for Avent SCD921

Brands by name

Popular brands

Philips Avent SCD921, User Manual

Search results

Summary of Contents for Avent SCD921

Reviews:

Related manuals for Avent SCD921

Brands by name

Popular brands