Philips Avent SCD921 User Manual Download

Page: 34 / 42

- 34 -

Ordering accessories

To buy accessories or spare parts, visit

www.philips.com/parts-and-

accessories

or go to your Philips dealer� You can also contact the Philips

Consumer Care Centre in your country (see the international warranty

leaflet for contact details).

Disposal of your old product and battery

Your product is designed and manufactured with high quality materials

and components, which can be recycled and reused.

This symbol on a product means that the product is covered by European

Directive 2012/19/EU�

This symbol means that the product contains a built-in rechargeable

battery covered by European Directive 2006/66/EC (which includes

amendments from Directive 2013/56/EU) which cannot be disposed

of with normal household waste� We strongly advise you to take your

product to an official collection point or a Philips service centre to have a

professional remove the rechargeable battery�

Follow your country’s rules for the separate collection of electrical and

electronic products and rechargeable batteries� Correct disposal helps

prevent negative consequences for the environment and human health�

Environmental information

All unnecessary packaging has been omitted� We have tried to make

the packaging easy to separate into two materials: cardboard box and

polyethylene (bags, protective foam sheet).

Remove the integrated battery

Note: We strongly advise you to have a professional remove the

rechargeable battery�

Only remove the rechargeable battery when you discard the appliance�

Make sure the battery is completely empty when you remove it� Only the

parent unit includes a battery�
Procedure:

Use a coin to unlock the openings of the battery compartment on the

back of the parent unit�

Remove the 2 rubber feet at the bottom of the parent unit�

Remove the 2 screws that are now visible at the bottom of the parent

unit�

Pull apart the battery compartment from the parent unit�

Remove the battery�

If there is no collection/recycling system for electronic products in your

country, you can protect the environment by removing and recycling

the battery before disposing the product� Make sure the product is

disconnected from the charging case before removing the battery�

Summary of Contents for Avent SCD921










































Search results

Summary of Contents for Avent SCD921

Reviews:

Related manuals for Avent SCD921

Brands by name

Popular brands

Philips Avent SCD921, User Manual

Search results

Summary of Contents for Avent SCD921

Reviews:

Related manuals for Avent SCD921

Brands by name

Popular brands