Philips 91816 Light Palette Classic 1500, Installation & Setup Manual

Page: 19 / 96

Hook-Up
11
Light Palette Lighting Control Console
Installation & Setup Guide
HOOK-UP
1. Connecting Console Components
To connect console components, do the following:
Step 1. At console rear panel, connect power supply (included).
Step 2. Connect monitor or touchscreen (sold separately).
Step 3. Install gooseneck lamps (sold separately).
Step 4. Connect USB-compatible peripherals (i.e. mouse, keyboard, etc.) as needed.
Figure 1: Console Rear Panel
2. DMX512 Output
The console provides four standard XLR 5-pin connectors for connecting to DMX512 devices. Each connector
supports one DMX512 universe of 512 DMX channels. Connect DMX512 devices as shown in
Figure 1 .
3. External Trigger Input
The console provides a switch closure trigger input.
This connector supports any compatible device which
can trigger the dry contact closure. The trigger function
is user-configurable using the PaletteOS software
interface. The trigger input connector is wired as shown
in
Figure 2 .
Trigger setup is done via [S3] Hardware Setup. Refer to
PaletteOS software
Help Menu for details.
A
B C D
DMX512 Out
Gooseneck
Audio (2)
USB (2)
Network
Monitor (HDB-15F) Serial (DB-9M)
Power
Monitor
(RJ-45)
(HDB-15F)
Processor
(XLR-5M)
External
Trigger
Input
PROCESSOR DETAIL
(XLR-3F)
Gooseneck
(XLR-3F)
MIDI/SMPTE Card
Expansion Slot
Triggering
Trigger Connections
Trigger 1 Short pins 1 & 2
Trigger 2 Short pins 1 & 3
Pin Description
1 Common
2 Trigger 1
3 Trigger 2
Figure 2: External Trigger Connection