Philips 26HFL5561L/27, User Manual

Page: 24 / 27

22
17 Stand assembly
•
Check the ESP setting and increase the time if you want the TV to
stay on for longer duration (see ‘Configure the control options’ on
page 16).
The TV cannot be turned off:
•
Check if the power mode has been set to
FORCED ON
. If it is,
change selection to any other setting.
No access to Philips Hospitality setup menu
The Philips Hospitality setup mode cannot be accessed using the guest
remote control:
• Check that the high-security mode has been turned off. Use the
Philips Hospitality setup remote control to access the Philips
Hospitality setup menu and select
CONFIGURATION
>
SECURITY > SECURITY > STANDARD to allow the use of guest
remote control (see ‘Select the security level’ on page 16).
The Philips Hospitality setup mode cannot be accessed using the Philips
Hospitality setup remote control:
• Check that the switch at the side of the Philips Hospitality setup
remote control is set to the SETUP position (see ‘Access the Philips
Hospitality setup menu with Philips setup remote control’ on page
9).
Picture issues
The TV is on, but there is no picture:
• Check that the antenna or the cable is connected properly to the
TV.
•
Check that source device and communication protocols are selected
correctly.
• Check that the channel(s) are installed and in the current ring.
•
If the video is muted, select
CHANNEL INSTALL
>
MUTE
>
NONE
or
CHANNEL INSTALL
>
MUTE
>
AUDIO
to unmute the
video (see ‘Mute a channel’ on page 12).
The TV is on, but picture quality is not good:
•
Check the antenna, cable or set-top box connections to the TV and
ensure that they are properly connected.
• Check that the picture settings are correct for your TV and the
source device
EN