10
In this way, each TV responds to only one RC that is set to the same color
as the TV itself. This prevents interference from each other’s remote control
when you watch multiple TVs in a room.
Note
• Multi RC supports a maximum of four TVs in one room and requires the
use of special remote controls. For more details, contact your local Philips
hospitality representative.
Set the TV to a particular RC
1
Press
to select
COMMUNICATION > MULTI RC
.
2
Press to select
REMOTE COLOR
.
3
Press to toggle through the four colors and select one.
4
Press
to select
STORE.
»
The TV is configured to respond to the RC that is set to the same
color.
5
Press
MENU
and the color button (same color as above) on the
guest RC simultaneously.
»
The guest RC is set to the selected color.
6
Press
OK
for five seconds while pointing to the TV.
»
The TV displays the RC color and the TV color on the screen. If
they do not match, program the TV and the RC again.
7 Select mode of communication
1
Enter the Philips Hospitality setup menu.
2
Press to select
COMMUNICATION
.
3
Press
to select one of the following options :
•
COMMUNICATION
: To select the communication protocol
between the TV and the external device connected to the TV.
•
STORE
: To store the settings that are modified using the
COMMUNICATION
menu.
•
PENDANT
: To enable or disable the healthcare
pendant control. This is available only when you select
COMMUNICATION > OFF.
Select the communication protocol
1
Enter the Philips Hospitality setup menu.
2
Press to select
COMMUNICATION > COMMUNICATION
.
3
Press
to select the communication protocol between the TV
and the set-top box :
•
SP-SPI
: Most commonly used connection.
•
SP-I2C
: When the set-top box supports this protocol. When
SP-SPI
or
SP-I2C
are selected, there are sub menu items for
DCM TYPE
and
CP
.
•
SERIAL XPRESS
: When the set-top box supports this protocol.
When
SERIAL XPRESS
is selected, the speed must be set.
•
MULTI RC
: To use Multi RC. See next section.
•
SMART RC
: To access PayTV channels using Smoovie remote
control.
•
OFF
: To turn off the communication between the TV and the
set-top box.
4
Press
to select
Store.
Note
• For
SP-SPI
and
SP-I2C
connections, if the set-top box requires a source
switch, select
DCM TYPE
>
GENERIC
.
Use Multi RC
Multi RC enables control of multiple TVs in a room without any interference
from each other’s remote control.
To enable Multi RC, each remote control is set to one of the four colors -
blue, green, yellow or red. Each TV in the room is separately programmed to
a remote control of one of those colors.
STORE
>
COMMUNICATION
COMMUNICATION
OFF
EN
Summary of Contents for 26HFL5561L/27
Page 2: ......
Page 25: ...23 Eng lis h EN 1 3 2 4 5 x 4 ...
Page 26: ......
Page 27: ... 2010 Koninklijke Philips Electronics N V All rights reserved ...
