Philips 26HFL5561L/27, User Manual

Page: 21 / 27

19
14 Clone data (TV Setup Data)
1
Enter the Philips Hospitality setup menu.
2
Press to select SMARTCLONE > SOURCE .
3
Press to select one of the following options:
• USB : To download clone data (TV setup data) from a USB
device to a TV or a TV to a USB device.
•
RF : To download clone data (TV setup data) from an RF
channel to a TV.
Download clone data from a USB device
1
Enter the Philips Hospitality setup menu.
2
Press to select smartclone
SOURCE
.
3
Press to select USB .
4
Press to select one of the following options:
• USB TO TV
: To download clone data (TV setup data) from a
USB device to TV.
• TV TO USB
: To upload clone data (TV setup data) from a TV
to a USB device.
Download clone data from an RF channel
1
Enter the Philips Hospitality setup menu.
2
Press to select smartclone
SOURCE
.
3
Press to select RF .
SMARTCLONE
SOURCE
RF
RF TO TV >
CABLE TUNING
RF CHANNEL NUMBER
YES
87
DIRECTION TV TO USB
START
SW DOWNLOAD
SW TYPE
IBOARD NVM
SOURCE
USB
>
•
STANDBY FIRMWARE
: To download the TV startup
data from the USB device. Only used in software
download.
• IBOARD NVM : To download the TV settings from the
USB device.
• IBOARD FIRMWARE : To update iboard software from
the USB device. Only used in software download.
• ALL : To download all the software upgrades from the
USB device.
•
START : To start the software download.
»
The TV will restart automatically upon the completion of software
download. There will be multiple downloads and restart cycles
when download ALL is selected.
Note
• “Firmwares” cannot be copied from the TV to USB. (only NVMs may be
copied from the TV.)
• The STANDBY FIRMWARE
is rarely updated and is not included when
SW TYPE > ALL is selected. To update the STANDBY FIRMWARE , the
SW TYPE > STANDBY FIRMWARE must be uniquely selected.
Configure the V-chip and closed caption settings
1
Enter the Philips Hospitality setup menu.
2
Press to select
CONFIGURATION > CC/ V-CHIP
.
3
Press to select one of the following options:
• SAVE CC : Select YES to use the last used CC mode. Select NO
to use the CC mode defined in the next option.
•
CC : Select a CC mode that is used when the TV is turned on.
If you select CONFIGURATION > CC/ V-CHIP > CC > ON,
the following options appear:
•
DIGITAL CC MODE : Allows you to select your digital CC
options. Select an option from CS1 to CS6. If this option is not
available for the current digital channel, the TV will switch to
ANALOG CC MODE
.
• ANALOG CC MODE : Allows you to set your analog CC
options. Select an option from
CC1
to
CC4
and
TXT1
to
TXT4
.
• V-CHIP MENU ITEM : Select YES to allow the guest to change
the V-CHIP settings. Otherwise, select
NO
.
•
SAVED V-CHIP : Select YES to save all the V-chip settings.
Otherwise, select NO .
• V-CHIP SETUP
: Select one of the available options to change
the V-CHIP settings:
• CLEAR ALL RATINGS
: To clear all the ratings.
•
US MOVIE RATING : To enable or disable the movie ratings.
• US TV RATING
: To enable or disable the TV ratings.
•
D. RATING : To configure the downloadable (RRT-5) rating.
CC ON
DIGITAL CC MODE CS1
ANALOG CC MODE CC1
SAVED V-CHIP
CC / V-CHIP
V-CHIP MENU ITEM NO
SAVE CC
YES
NO
V-CHIP SETUP
>
En
gl
is
h
EN