22
FILLING HUMIDIFYING PAN
CAUTION
(When an optional UV system set MCO-18UVS3 is installed)
When refilling the water in the humidifying pan,
always wipe off any dirt from the water level sensor
with alcohol for disinfection
. While doing that, be careful not to apply excessive force to the sensor lead
wire.
Note:
The humidity in the incubator chamber is adjusted to the optimum setting. To prevent condensation on the
surface inside chamber and the inner door, there is a low-temperature area under the humidifying pan in
the bottom of chamber to recondense evaporated moisture. Condensation may occur around the
humidifying pan at the bottom of the chamber (on the inside of the humidifying pan cover), but this does
not indicate a problem.
