Phase AxM II 04.09.4, User Manual

Page: 57 / 84

first Installation and Tests | 59
With
Browse
button select the firmware file to download
Ex. “SysApp-1-4-291-xxxx-xx.sre”
Press
Enable
button to enable drive receiving new firmware, then press
Load
to effectively
start code download. When finish
Reset
the drive.
We supply different kind of drive with different hardware settings so a files list are available.
It is important select the right file.SRE to download.
SysApp-1-4-291-xxxx-xx.sre
SysApp-1-4-291-xxxx-xx.sre
SysApp-1-4-291-xxxx-xx.sre
You can see the wich Hardware you have by selecting
Service/Target Information
menù:
Select .SRE file with corresponding FPGA ID Type (FPGA ID Build has to be ignored).
The drive will
be unusable if
any troubles
occurs during the
Firmware download
operation (Ex. Lost
of 24V supply,
PC connection
problem, …).
Repeat the firmware
download setting
serial interface
parameters to Bit
Rate 38400 –
N,8,1 – address 0.
AxM-II (2011-10).indd 59 18/10/11 15:15