Phase AxM II 04.09.4, User Manual

Page: 31 / 84

Hardware Description | 33
Communications (connectors S1, C1, X1 e X2):
» serial asynchronous interface RS232 / RS422 / RS485
» CiA CANOpen DS301 / DSP402 V4.02 fieldbus interface
» EtherCAT (COE) real-time ethernet fieldbus
4.3 HARDwARe
» IP 20 Cabinet protection, with internal RFI shield,
» Control and power interfaces with removable terminals and connectors,
» Encoder and serial interface with D standard connectors,
» Integrated ground bar (3xM4) for shields and groundings.
4.4 leD DISPlay
Led meaning
During the drive’s normal work, the following operating conditions are monitored on the led
display (more than one led can light together).
Drive condition Leds on Lighting mode Description
Alarm
0, 1, 2,
3, 4
Fix
Display the binary code of the active alarm.
Refer to chap. 9 for codes description
S 1 Hz flashing
Drive condition Led on Lighting mode Description
Drive Ok E
1Hz flashing Drive’s normal run. Disabled.
2 fast flashing every
500ms Drive’s normal run. Enabled.
Field Bus
Communication C Variable frequency
flashing The drive is connected to a field bus line. Flashing
every data received.
4 3 2 1 0 S C e
4 3 2 1 0
Normal work conditions
When the drive is in “alarm” or “error” condition, all run condition signals are cancelled: the
leds show the alarm codes only.
Alarm conditions
Status Enable
Communications
AxM-II (2011-10).indd 33 18/10/11 15:15