background image

3

Danger of damage to the pump or system.

CAUTION

Danger of burns
from touching hot parts.

WARNING

Danger of an electric shock.

WARNING

Read and follow all the instructions in this manual.

Inform yourself regarding:

Hazards which can be caused by the pump;

Hazards which can arise in your system;

Hazards which can be caused by the medium being
pumped.

Avoid exposing any part of your body to vacuum.

Observe all safety and accident prevention regulations.

Check regularly that all safety requirements are being
complied with.

Do not carry out any unauthorised conversions or
modifications on the pump.

When returning the pump to us please note the shipping
instructions in Section 7.

1.1. For Your Orientation

Instructions in the text

Operating instructions: Here, you have to do something

Symbols Used

The following symbols are used throughout in the illustrations:

Vacuum-flange

Gas ballast

Exhaust flange

Power connection

Position-Numbers

Identical pump and accessory parts have the same position
numbers in all illustrations. 

Danger of injury

from moving parts.

WARNING

Danger of personal injury.

WARNING

1. Safety Precautions 

1.2. Pictogramm-Definition

Modifications reserved

Attention to particularly important information

on the product, handling the product, or to a
particular part of the documentation.

PLEASE NOTE

Summary of Contents for DUO 120 A





















Reviews: