Pfaff CREATIVE 2.0 -, Owner'S Manual

Page: 35 / 68

Sewing
Manual buttonhole
1. To sew a buttonhole longer than 50 mm, use
presser foot 5M. Make sure that the IDT is
disengaged.
2. The À rst column will be sewn backwards.
Sew the À rst column as long as you want the
buttonhole. The graphic display will show the
part and sewing direction of the buttonhole
that is being sewn.
3. Press the reverse button. The machine sews
the bartack and the second column. When the
columns are aligned, press the reverse button
again to sew the second bartack.
The machine will stop automatically when the
buttonhole is complete.
Note: The repeat icon will be highlighted, showing
you that repeat is activated. You can repeat the
buttonhole as many times as you wish by pressing
the foot control.
4. Press the F2 button to deactivate repeat.
Corded buttonhole
Corded buttonholes that are sewn with gimp
threads are more stable, durable and have a
professional appearance. Use pearl cotton or a
regular gimp thread.
1. Place the center of a length of gimp thread over
the metal bar extending from the center back
of the sensormatic buttonhole foot 5A. Pass the
thread ends under the foot and pull up into the
right and left guides on the front of the presser
foot.
2. Snap on the sensormatic buttonhole foot 5A.
Before starting to sew, make sure that the red
arrow lines up with the marking on the foot.
3. After completing the buttonhole, pull the ends
of the gimp thread until the loop of thread is
hidden below the buttonhole bartack.
4. Thread the gimp threads into a needle and pull
them to the wrong side of the garment. Tie the
gimp threads and cut off the excess thread.
3:7