Sealing
49
10
.08
Programmed sealing with sequences
In the headline, in addition to the sequence number of the selected sequence, the num-
ber of zones, the current zone and the comment for the current program are displayed. For
the current zone all heat-sealing parameters are displayed. The heat-sealing parameters have
been stipulated during programming and cannot be processed without changing the pro-
gram. In addition, in the case of sealing with sequence programs, the individual programs
belonging to the sequence are displayed, and the current program is shown here as an inver-
se symbol.
Select the desired sequence, see Chapter
9.02 Selecting a program.
●
Description of the functions
Program selection
The function opens the menu for entering the program number or for choosing the
production type, see Chapter
9.02 Selecting a program
.
Notepad
This function opens the notepad with program details about the heat-sealing tools to be
used.
Sealing program
Press this function to select the appropriate sealing program.
Basting
This function opens a menu for entering the sealing parameters for basting, see Chapter
10.04
Basting
.
Start
(This function appears, when the top feed roller is lowered.)
This function is used to call up the sealing start, analog to pedal function "+2", also see
Chapter
7.03 Pedal
.
Feed roller up/down
This function is use to raise or lower the top feed roller, depending on its position, analog to
the pedal functions "-1" and "+1", also see Chapter
7.03 Pedal
.
Turn rollers
This function opens the menu for turning the rollers, see Chapter
10.10 Turning the rollers.