Preparation
27
9
.03.02
Entering the sealing speed
During the input a difference must be made between manual and dynamic sealing. In the
case of manual sealing, the sealing speed is fixed, in the case of dynamic sealing a speed
range is fixed.
Entering the values in manual sealing
Alter the value for the sealing speed directly.
or
Call up the number block for entering the sealing speed.
●
●
If necessary, call up the number block for entering the speed difference between the top
and bottom roller.
Enter the value for the speed difference within the permissible range on the number
block.
The speed difference results from the change in speed of the top roller, which turns eit-
her more quickly or more slowly than the bottom roller. The value for the speed difference
depends on the material and the application.
Conclude the input for the speed difference, permissible values will be taken over.
Enter the value for the speed difference within the permissible range on the number
block.
Conclude the input for the sealing speed, permissible values will be taken over.
●
●
●
●
●
●