Sealing
43
10
.05.07
Example of how to enter a sealing program
The following example should be filed under program number "
10
"
with the comment
"PROG
10",
and should consist of three seam zones:
- Seam zone
1
with switch to another zone after
200
mm seam length
- Seam zone
2
with reduced sealing speed and speed difference between the top and bot
tom feed roller, and switch to another zone after
100
mm
- Seam zone
3
with original sealing speed without speed difference between the feed
rollers and with switch to another zone after
400
mm
Switch on the machine.
Call up the programming function.
●
●
Enter program number "
10
"
.
●
Confirm input.
The sealing parameters from the manual sewing mode are taken over for seam zone
1.
●