Pfaff Industrial 3307-1 Series, Instruction Manual, Page: 38 / 130

Sewing
38
10 Sewing
The machine must be installed, connected and set up in accordance with
Chapter 8 Installation and Commissioning .
The screen display on the control panel and consequently the operation of the
machine is dependent among other things on the subclass and the sequence
mode being activated, see Chapter 9 . 09 Activating the sequence mode .
●
Switch on the machine.
2 0 0 0 1 1 0 1 5 0 0
Screen displays:
2000 : Maximum speed
The value can be changed directly with the corresponding +/- keys .
1 : Stem length
The value can be changed directly with the corresponding +/- keys .
( 1 = no stem; 2 = short stem; 3 = long stem)
10 : Program number
The seam pattern can be selected directly with the corresponding +/- key . In
conjunction with the four keys for button type (two-hole button, four-hole button,
three-hole button and six-hole button), for each button type 99 stored seam pat-
terns can be selected.
1500 : Piece counter
The value can be changed directly with the corresponding +/- keys .
To set the counter at “ 0 ", press the “piece counter" key.
The function of the other keys and symbols is explained in Chapter
7.06 Control panel.