Pfaff Industrial 3307-1 Series, Instruction Manual, Page: 26 / 130

Mounting and commissioning the machine
26
8
.01.04
Fitting the reel stand
●
Fit the reel stand as shown in Fig. 8 - 04 .
●
Afterwards insert the stand in the hole in
the table top and secure it with nuts pro-
vided.
Fig. 8 - 04
8
.02
Commissioning
●
Clean the machine thoroughly and then check the oil level ( see Chapter 12 Care and
Maintenance ).
●
Check the machine, in particular the electric leads and pneumatic connection tubes, for
any damage.
●
Have mechanics ensure that the machine’s motor can be operated with the available
electricity supply.
●
Connect the machine to the compressed air system. The manometer should show a
pressure of 6 bar.
●
If necessary, set this value ( see Chapter 12 . 05 Checking / adjusting the air pressure ).
●
Before the machine is commissioned, the seam pattern sizes set in the machine control
unit must be checked, see Chapter 8 . 04 Setting the seam pattern size .
8
.03
Switching the machine on / off
●
Switch the machine on or off ( see Chapter 7 . 01 Main switch ).